Acme F100-01 - Manual (Page 5)

GB
Replacing the Remote Control Battery
1. Remove the battery compartment cover by pulling the cover in
the direction of the arrow.
2. Remove the battery.
3. Insert the replacement battery.
• Keep attention on the direction of the correct polarization (+/-).
4. Put the cover back to the battery compartment.
Technical Parameters
Storage temperature: -5°C up to +45°C
Working conditions temperature: 0°C up to +40°C
Operation relative humidity: 20% – 90% (40°C)
Storage relative humidity: 20% – 93% (40°C)
EMI standard: FCC (class B)
Supply voltage: 12V-24V DC power
Electric current: 12V (normal working) <100mA
Bit rate: 32Kbps – 256Kbps
FM transmitting frequency: 87.5 – 108.0 MHz
Transmitting frequency options: Press CH key to switch channels
(can be stored in advance).
Frequency response: 30 – 15 KHz ± 3db
SNR (Signal to Noise Ratio): 30db
Harmonic distortion: ≤1%
Transmitting distance: 3 – 5 m
Security and Disposal Hints for Batteries
When a child swallowed a battery by mistake go to a doctor’s •
place or bring the child into a hospital promptly!
Never short batteries. •
Look for the right polarity (+) and (-) of batteries! Always change •
all batteries, never use old and new batteries or batteries of
erent types together.