Acme V-150 - Manual (Page 6)

6
GB
Connecting to a Computer
Connect the player to a computer with the USB cable provided in order to:
• Transfer files to and from your player
• Perform basic file management procedures.
Once you have connected your player:
• Your computer will automatically recognize the player as a Removable Disk. An icon representing your player will
appear under “Devices with Removable Storage” when you open “My Computer”.
• It may take Windows several minutes to recognize and set up the device the first time it is connected, depending
upon your hardware configuration.
Transferring/Managing Files
The USB 2.0 connection makes it easy to transfer music quickly between the player and your computer. Simply use
the player as you would any removable disk using basic operating system commands.
You can also use your player to store video, photos, or any other type of files.
If you need further assistance with transferring and managing files, please refer to your operating system’s instruction
manual or on-screen help. If you are using media management software such as iTunes, WinAmp, or Windows Media
Player, please refer to their documentation for support.
Do not disconnect or otherwise interrupt the player during file transfer - this could damage or corrupt the player’s firmware
or your files.
For more information and support regarding music transfer and synchronization with Windows Media Player (WMP),
please see the help section included with WMP (click “Help > Synchronizing Content to Devices”).
Disconnecting from a Computer
Disconnect your player as instructed below to prevent data loss or file/firmware corruption.
Microsoft Windows
1. Double-click the green arrow in the taskbar located on the lower-right side of the computer screen (Safely
Remove Hardware).
2. Safely Remove Hardware: Select “USB Mass Storage Device” from the list that appears and then click on “Stop”.
Stop a Hardware Device: Select “USB Mass Storage Device” from the list that appears and then click on “OK”.
3. When the “Safe to Remove Hardware” window appears, click the OK button and disconnect the USB cable from
the player and your computer.
Macintosh OS X
1. On the left side of the Finder Window, identify the appropriate Removable Disk icon.
2. Click on the “Eject” arrow on the right of the Removable Disk icon.
3. Disconnect the USB cable from the player and your computer.