Acnodes FPC 7150 User Manual
Page 52
FPC 71X0 User Manual
5-44
HEISEI Electronics Co., Ltd.
5.12 Set Supervisor/User Password
Steps to set supervisor/user password are described as follows:
New password setting:
1. While pressing <Enter> to set a password, a dialog box appears to ask
you enter a password.
2. Key in a new password. The password cannot exceed eight
characters.
Please Enter Your Password
3. System will request you to confirm the new password again.
Please Confirm Your Password
4. When completed, new code takes effect.
No Password Setting:
If you wants to disable the password, just <Enter> as a password input is
requested.
If you forget password:
If you forget the password, the only way to access the system is to clear the
CMOS memory. You may remove the battery from motherboard and put it
back to clear the setting.