Acnodes FES 5313 - Manual (Page 84)

7-3 Enable IntelÆ AMT in the IntelÆ
Management Engine BIOS Extension (MEBX) Screen
1. When the system reboots, the following message will be displayed. Press <Ctrl-P> as soon as the
message is displayed; as this message will be displayed for only a few seconds.
2. You will be prompted for a password. The default password is admin . Enter the default
password in the space provided under ME Password then press Enter.
3. Enter a new password in the space provided under ME New Password then press Enter. The
password must include:
8-32 characters
Strong 7-bit ASCII characters excluding : , and
characters
At least one digit character (0, 1, ...9)
At least one 7-bit ASCII non alpha-numeric
character, above 0x20, (e.g. !, $, ;)
Both lower case and upper case characters