Acnodes KD 8191 - Manual (Page 13)

1.12 How to Install "One Man" Installation Slides
Chapter 1
Install into rack
1
■ Attach the mounting bracket to vertical
mounting rails.
■ Adjust the rear mouting bracket to fit your
rack.
■ Repeat the above steps for the other side
Caution :
Leaving the screws slightly
loose (Not release).
2
■ Attach support brackets to chassis with
M3.2*4.5mm screw x 3 pcs.
■ Repeat the above step for the other side.
■ Pickup the chassis.
3
■ Insert inner members of slides into the
already mounted internal slide members
in the rack.
■ Push the white arrow button on each slide
that is installed on the LCD keyboard
drawer to unlock (Push at the same time).
Caution :
Be careful when pushing the
chassis into the left and right slides. Avoid
pressing the red button located on either side
of the slide.
P.10