Acnodes RMC 7135 - Manual (Page 14)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7135
1U Rackmount System
1-3 Server Chassis Features
The following is a general outline of the main features of the RMC7135 chassis.
System Power
The RMC7135 chassis includes a single 280W power supply.
SATA Subsystem
For the RMC7135, the RMC7135 chassis was designed to support four SATA hard drives, which are
hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-swap capability of the
SATA drives (system-based RAID is not available for SATA).
Control Panel
The control panel on the RMC7135 provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions.
The control panel also includes a main power button and a system reset button.
Rear I/O Panel
The rear I/O panel on the RMC7135 provides one motherboard expansion slot, one COM port (another
is internal), two USB ports, PS/2 mouse and keyboard ports, a graphics port and two Gb Ethernet
ports.
Cooling System
The RMC7135 chassis has an innovative cooling design that features one 10-cm blower-type system
cooling fan. The blower fan plugs into a chassis fan header on the motherboard and an air shroud
channels the airflow to efficiently cool the processor area.
A fan speed control setting in BIOS allows fan speed to be determined by system temperature [the
recommended setting is 3-pn (Server)].