Acnodes FES 2953 - Manual (Page 10)

Mounting FES2953 to the Wall
Using attached mounting rail, you can install FES2953 on wood, drywall surface over
studs, or a solid concrete or metal plane. Ensure the installer uses at least four M4
length 8mm screws to secure the system on wall. Six M4 length 8mm screws are
recommended to secure the system on wall.
Fasteners are not included with the unit, and must be supplied by the installer. The
types of fasteners required are dependent on the type of wall construction. Choose
fasteners that are rated either ”Medium Duty“ or ”Heavy Duty.“ To assure proper
fastener selection and installation, follow the fastener manufacturer
’s
recommendations.
Wa ll m ounting re quirem ents
Note: Before mounting the system on wall, ensure that you are following all
applicable building and electric codes.
When mounting, ensure that you have enough room for power and signal cable