Acnodes KD 5154 - Manual (Page 19)

15
Setup and Operating Guide
Using the OSD
Follow these steps to activate the on-screen display:
Step 1. Power up the computer system and then turn on
the LCD.
Step 2. Press M to invoke the on-screen menu.
Step 3. Press S to step through the main options.
Step 4. Press either ~ or € button to bring up sub-menus
of the highlighted option.
Step 5. Press M to step through the sub-menu options.
Step 6. Press either ~ or € to modify the selected
parameter value. Pressing a button once in-
creases or decreases the numerical value by a
single digit. Holding down a button increases the
rate of change. Press M to return to the previous
screen.
Step 7. After you’ve made your adjustments press M
repeatedly until the OSD is turned off.