Fes6905, A.1 programming, Configuring sequence description – Acnodes FES 6905 User Manual
Page 47
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES6905
Fanless Embedded Controller comes with
Intel Celeron M Processor
A.1 Programming
FES-6905 utilizes the ITE 8712 chipset as its watchdog timer controller. Below are the procedures
to complete its configuration and the Acnodes initial watchdog timer program is also attached with
which you can develop a customized program to fit your application.
Configuring Sequence Description
After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical
devices disabled except KBC. The initial state (enable bit ) of this logical device (KBC) is deter-
mined by the state of pin 121 (DTR1#) at the falling edge of the system reset during power-on reset.