Acnodes FPC 8759 - Manual (Page 32)

LCD ID Setting
Several configurations are applied to different sizes of panel. Please refer to the
followings to complete relevant settings.
Resolution
LVDS
Output Interface JP8
Bits Channel
800 x 600 24 Single
1st: LCD Panel
2nd: VGA Port
1 3 5 7
2 4 6 8
1024 x 768 24 Single
1 3 5 7
2 4 6 8
1366 x 768 24 Single
1 3 5 7
2 4 6 8
800 x 600 18 Single
1 3 5 7
2 4 6 8
*800 x 600 18 Single
1 3 5 7
2 4 6 8
1024 x 768 18 Single
1 3 5 7
2 4 6 8
1280 x 1024 24 Dual 1st: VGA Port
1 3 5 7
2 4 6 8
*remark : specialized for Sharp 12.1” LQ121S1LG41/LQ121S1LG42 panel.
1 1
2 Jumper open 2 Jumper short
2nd VGA Power Setting
VGA port
power must be on through BIOS/Utility for default is “No Power“.
BIOS/Utility setup
1. Press <DEL> key to enter BIOS
SETUP UTILITY when system
boot up.
2. Find tab "Advanced".
3.
Select "Power Configuration
COM/VGA Ports" and press
<Enter> to go to sub screen.