Acnodes FPC 7120 - Manual (Page 16)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7120
Fanless Touch panel PC
RAM and compare them to the equipment check conducted during the power on self-test (POST). If
any error or mismatch occurs, an error message will be shown on the screen and the computer will be
prompted to run the setup program.
2.2.3 Operating System and Driver
The standard FPC 7120 series system may not be equipped with an operating system (OS). If you are
a commercial user, the system is likely to have been preinstalled with a proper operating system and
software drivers by your dealer or system integrator. If the system is not pre-installed with any system
OS and drivers or you intend to install your preferred ones, you will need to load an OS and software
into the system.
1. Use the external IDE Cable (optional) to connect a USB CD-ROM Drive to load and OS from a
bootable CD. Recent releases of operating systems include setup programs that load automatically
and guide you through the installation. You can also refer to your OS user manual for instructions on
formatting or partitioning the hard disk drive before any software installation.
2. Install software drivers for your operating system and any peripherals that are connected. The FPC
7120 series utility CD includes software drivers for Chipset driver, Audio, LAN, Touch, Wireless and
VGA Display drivers. See driver installation chapters for more information.