ACR&Artex DGL-1 - Manual (Page 13)

25-69-01
Page 13 of 44
JUN 27/12
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
DGL-1, DONGLE (453-4010)
INTRODUCTION
TASK 25-62-30-870-801
1. Manual Usage
SUBTASK 25-62-30-990-001
A. General
(1) This manual describes the operation, installation, and maintenance of the DGL-1 (Dongle)
Programming Adapter. This information is provided to ensure initial and continued
airworthiness. Information presented in this manual is accurate at time of printing, but is
subject to change. Refer to the Artex products web site at www.acrartex.com for the latest
information and any updates to this manual.
(2) Web links provided in this manual were accurate at time of printing, but may be subject to
change.
(3) Regulatory references contained herein are generally confined to United States and Canadian
requirements and, in any case, should not be considered all encompassing. Consult your
national aviation authority for applicable requirements.
SUBTASK 25-62-30-990-002
B. Application
(1) This manual constitutes supporting data/documentation for the Dongle, including:
(a) Description and Operation
(b) Test and Fault Isolation (includes inspection criteria)
(c) Removal
(d) Installation
(e) Registration
(f) Illustrated Parts List
(2) In the United States, a 406 MHz ELT must be installed and maintained in accordance with the
requirements herein and 14 CFR, FAR Parts 43, and 91; and other airworthiness requirements,
as applicable.
(3) 406 MHz ELT installation and maintenance in all other countries must comply with the
requirements herein and applicable national airworthiness requirements.
(4) The accessories (i.e., remote switch) addressed in this manual are the accessories most
commonly associated with a 406 MHz ELT. Other options, such as a different remote switch