ACR&Artex ELT to Nav Interface - Manual (Page 39)

25-69-10
Page 39 of 58
APR 30/12
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
453-6500
REMOVAL
TASK 25-69-10-050-801
1. ELT/NAV Interface
SUBTASK 25-69-10-050-001
A. Removal
(1) See "Figure 5. ELT/NAV Interface Removal".
(2) Disconnect ELT/NAV Interface plugs:
(a) P2, and
(b) P1, if installed.
(3) Install connector covers to protect the ELT/NAV Interface receptacles.
(4) Remove the screws attaching the ELT/NAV interface to the mounting structure.
Figure 5. ELT/NAV Interface Removal
REMOVE SCREWS
(6 PLCS)
3
REMOVE P1, IF INSTALLED
REMOVE P2
ELT/NAV
INTERFACE
ELT (REF.)
1
2
NOTE: CABLES AND PLUGS
NOT SHOWN FOR CLARITY.
MOUNTING
STRUCTURE
(REF.)