Introduction, Application – ACR&Artex SLB406 ELT User Manual
Page 10
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
SLB 406 ELT
Page 10 of 43
MAR 27/11
570-6700 Rev. B
Initial Issue DEC 19/2006
Introduction
This manual contains all necessary information to describe, operate, install and maintain
the SLB 406 ELT. The manual contains all necessary information to ensure continued
airworthiness. Artex does not generate Aircraft Flight Manuals (AFM) or supplements
thereof; these documents are the responsibility of the aircraft operator as required by
FAR 121 subpart G §121.131 through §121.141.
Information presented in this manual is accurate at time of printing but is subject to
change. Refer to the ACR products web si
for the latest
information and any updates to this manual.
Web links provided in this manual were accurate at time of printing but are subject to
change.
Regulatory references are aimed at FAA requirements. Consult your national aviation
authority for requirements if you are located outside of the US.
Application
This manual constitutes FAA approved data as described in AC 43.9-1E, paragraph
(h)(2) and AC 43-210, chapter 2, paragraph 201(a)(6) for major alterations. Not all
installations are “major”; consult an FAA designee or regional office for clarification.
The conditions and tests required for TSO approval of this article are minimum
performance standards. It is the responsibility of those desiring to install this article
either on a specific type or class of aircraft to determine that the aircraft installation
conditions are within the TSO standards. The article may be installed only if further
evaluation by the applicant documents an acceptable installation and it is approved by
the Administrator.