ACS ACR100I SIMFlash II - Manual (Page 16)

Document Title Here Document Title Here
Document Title Here ACR100I Reference Manual
Version 1.00
Page 16 of 20
www.acs.com
.hk
[email protected]
www.acs.com.hk
Offset Field Size Value Description
9 bClockStatus 1
value =
00h Clock running
01h Clock stopped in state L
02h Clock stopped in state H
03h Clock stopped in an unknown
state
All other values are RFU.
7.1.2.3. RDR_to_PC_Parameters
This message is sent by ACR100I in response to PC_to_RDR_GetParameters,
PC_to_RDR_ResetParameters and PC_to_RDR_SetParameters messages
Offset Field Size Value Description
0 bMessageType 1 82h
1 dwLength 4 Size of extra bytes of this message
5 bSlot 1 Same value as in Bulk-OUT message
6 bSeq 1 Same value as in Bulk-OUT message
7 bStatus 1
Slot status register as defined in CCID
Section 4.2.1
8 bError 1
Slot error register as defined in CCID
Section 4.2.1 and this specification
Section 5.2.8
9 bProtocolNum 1
Specifies what protocol data structure
follows.
00h = Structure for protocol T=0
01h = Structure for protocol T=1
The following values are reserved for
future use.
80h = Structure for 2-wire protocol
81h = Structure for 3-wire protocol
82h = Structure for I2C protocol
10
abProtocolDat
aStructure Byte
array
Protocol Data Structure as summarized
in Section 5.2.3.