Activeforever Invacare SOLO2 Portable Oxygen Concentrator - Manual (Page 15)

SECTION 5—TYPICAL PRODUCT PARAMETERS
Part No 1156872 15 Invacare SOLO
2
™
POWER INPUT: 24 VDC @ 7.5 Amp
or
11-16 VDC @ 10.0 Amp max
(12.6 VDC Nom.)
EXTERNAL POWER SUPPLY
INPUT:
AC POWER SUPPLY:
DC POWER SUPPLY:
120 VAC, 50/60 Hz @ 2.5 amps
230 VAC, 50/60 Hz @ 1.25 amps
11-16 VDC,
(12.6 VDC Nom. @ 10.0 Amp max)
SOUND LEVEL: < 40 dBA weighted @ 2 LPM continuous and
all pulse settings (1-5)
ALTITUDE: Up to 10,000 ft (3046 m) above sea level
Titration recommended for use above 10,000
ft (3046 m)
OXYGEN CONCENTRATION:*
*BASED ON AN ATMOSPHERIC
PRESSURE OF 14.7 PSI (101 KPA) AT
70°F (21°C) NOMINAL 87% to 95.6%, after initial warm-up period
(approximately 5 minutes) at all flow rates
CONSERVER TRIGGER
SENSITIVITY:
FACTORY SET - NO ADJUSTMENT
PRESSURE ACTIVATED < 0.20 cmH
2
O max pressure drop
All settings - using 7 ft (2.1 m) cannula
CONSERVER TRIGGER DELAY:
FACTORY SET - NO ADJUSTMENT 35 mSec max
Nominal value - using 7 ft (2.1 m) cannula
CONSERVER BOLUS
DELIVERY:
FIXED MINUTE VOLUME Setting 1: 400 cc
Setting 2: 800 cc
Setting 3: 1200 cc
Setting 4: 1600 cc
Setting 5: 2000 cc
Total cc’s ± 75 cc delivered per minute
CONSERVER BREATH RATE
CAPACITY: Up to, and including, 35 BPM without
reduction of bolus minute volume
CONTINUOUS FLOW
SETTINGS: 0.5 through 3.0 LPM @ 0 psi
0.5 LPM increments
All settings are ± 0.2 LPM
(2.0 LPM max w/Ext DC Power Cable)