Activeforever EWheels EW-66 2 Passenger Mobility Scooter User Manual
Page 22
21
3) Keep the charger and battery away from water to
prevent electrical shock and shorting. The charger
is intended for use in a covered dry area only.
4) Plug the end of the charger’s cord into the socket
of the adaptor first. Next connect the adaptor to
the EW-36/EW-66 (the charger port in located
below thefront of the seat). Then plug the
chargers’ AC cords into the wall outlet.
5) Read the charger label to learn about the charger
indicator lights, and their meanings.
6) Generally, a short drive will require a short time to
re-charge, and a long ride will require a longer
time. A complete (90%) discharge may require 6
hours to recharge. To prevent electrolysis (battery
fluid loss by hydrogen generation,) do not charge
for longer than eighteen hours.
Before riding the electric bike for the first time, you must
charge the batteries for 4-6 hours using the supplied
charger. To charge, pull the protective cover from the
charging sockets. Then plug the charger into the
charging socket, and plug the charger into a wall outlet.