Activeforever AirFlow Breeze Register Booster Fan - Manual

Note:
•
Turn the function switch to “OFF” position
•
Prior to setting the function (Heat or Cool) remove the unit from the
vent opening.
•
Allow a few minutes for the unit to automatically adjust to room
temperature
Setting AirFlow Breeze for “HEAT”
•
Turn the “SET POINT” switch all the way to the left so the arrow
points to the end of the blue section of the dial.
•
Turn “FUNCTION SWITCH” to the “HEAT” position
•
The fans will begin to run
•
Depress the “FAN SPEED” button to choose desired speed.
•
Slowly turn the “SET POINT” switch to the right until the fans stop
running. The AirFlow Breeze is now set for the heat function.
• Place the AirFlow Breeze into the vent opening.
•
Relax and enjoy the comfort of your room.
Setting AirFlow Breeze for “COOL”
•
Turn the “SET POINT” switch all the way to the right so the arrow
points to the end of the red section of the dial.
•
Turn “FUNCTION SWITCH” to the “COOL” position
•
The fans will begin to run
•
Depress the “FAN SPEED” button to choose desired speed.
•
Slowly turn the “SET POINT” switch to the left until the fans stop
running. The AirFlow Breeze is now set for the cool function.
•
Place the AirFlow Breeze into the vent opening.
•
Relax and enjoy the comfort of your room.
AirFlowBreeze is covered under U.S. Patent No. 5,632,677 and additional Patents Pending.
AirFlow Breeze
Series 3.1
Rev. B