Assembly instructions – Activeforever Risedale Lift Chair User Manual
Page 5
Advertising
Assembly Instructions
Choose a clean area to assemble your Risedale.
After the box is removed, flip the chair over. Save the box
and all packing materials in case you have to return the chair.
Screw in the legs and
tighten with the hex
key provided. We
advise using
the supplied wood
screws to secure
the legs further.
Note: If any leg will
not screw in by hand,
do not force it.
Unscrew the leg,
check for and clean
out any debris in the
threaded hole and
try again.
Note: The serial
number is on the label
attached to the bottom
of the chair. You may
want to note that now
and write it on your
Warranty Card.
For users shorter
than 5'1" remove
the leg extensions
using the hex
key provided.
RISEDALE USER GUIDE
5
Advertising