Activeforever ActiveCare Osprey 4410 Mobility Scooter User Manual
Page 14
For service assistance, please call your authorized ActiveCare dealer.
13
Osprey 4410 Owner’s Manual
Warning!
1. Keep away from flammable objects while charging, as it may lead to fire or
explosion of the batteries.
2. As the battery may produce hydrogen, do not smoke while charging. Always
charge your battery in a well-ventilated space.
3. Never connect or disconnect the plug or cord with wet hands while charging. Do
not connect or disconnect the plug or cord when they are wet, this may lead to an
electric shock.
Warning!
Do not open the battery seal cap at any time.
CLEANING THE BATTERIES
If the battery is contaminated by dirty water, battery acid, dust or other garbage, the battery will
discharge more quickly. Therefore, please follow the following steps to clean the battery. If
necessary, ask for help from your ActiveCare dealer for cleaning and replacing of the battery.
1. Turn the scooter power switch to OFF.
2. Remove the seat.
3. Remove the shroud and unplug the terminal of the taillight and signal lights.
4. Use a clean cloth to wipe off the soiled area.
5. Take out the battery.
6. Clean the battery with a clean cloth. If the terminal is covered by white powder, please
clean it by using warm water.
Do not expose the battery to temperatures lower than 14
°
F or higher than 122
°
F when charging
or storing the scooter. Exceeding the specified temperature ranges can lead to freezing or
overheating of the battery. This will possibly damage the batteries and shorten their lifetime.
The battery used on your scooter is sealed lead acid, which is maintenance-free, so it is not
needed to change or refill the battery liquid.
Suggestion
1. Do not use the battery to charge any other equipment.
2. Battery capability will vary with outside conditions; the driving distances will
be shorter in the winter.
3. If the scooter is not to be used for a long time, please charge the battery
every three months.
4. Replace both batteries at the same time.