Activeforever Drive Medical Bed Assist Rail with Folding Bed Board (Drive Bed Assist Rail with Bed Board) - Manual (Page 2)

installation instructions
This bed assist board is designed for use
on a bed with a box spring and mattress.
1. Remove contents from carton.
2. Remove mattress from bed.
3. Unfold the top and bottom extension
(figure 1) and lie flat on the
bed surface.
4. Attach the hand brace (figure 2) to
the base support frame by depressing
the brass lock pins and sliding the
hand brace into the tubing (figure 3)
until the lock pins “snap” through the
positioning holes.
5. Locate a convenient distance from
the head of the bed to position the
bed assist rail.
6. Replace mattress on top of
box spring.
figure 1
figure 2
figure 3