Activeforever Spa2Go Portable Spa (Blue) User Manual
Page 2
 
4. With high pressure garden hose nozzle, spray at a 45 degree downward direction in 
between each pleat all the way around filter. For best results soak in a spa filter cleaner 
(available at most pool, spa, or hardware / home stores). 
Just rinsing in the sink will NOT do the job. Let dry before replacing. 
 
 
6. Place filter lid on tank, thread on filter lid retaining lock clockwise until snug. Hand 
tight only. Do not cross - thread. 
3. Turn filter lid retaining lock lid counter clock wise 
and remove, remove filter lid, lift out and remove 
filter cartridge. Filter goes in with the Black Foam end 
down. Do not lose this Gasket 
 
5. Place filter back into filter tank. Make sure 
rubber Gasket is seated in place around perimeter 
of filter housing top groove. 
Open Bleed Valve on top of the filter bucket. 
There will a small amount of water to flow out. To 
avoid any water to spill onto floor or surfaces, it is 
advised to place a towel around the bleeder valve 
 
Place towel around this section