Activeforever RemRest 901 CPAP Machine - Manual (Page 10)

10 RemRest
3. The two green lights (on/off light and
ramp light) will turn on for two seconds
then will remain off until the motor/blower
is turned on and/or the ramp function is
turned on. If the ramp function was used
the last time the device was operated,
then the ramp light will stay on.
4. To turn on a Tier 1 device, press the
on/off button. The on/off light will turn on
and the CPAP device will accelerate to its
prescription air pressure setting. If the
ramp function is turned on (the ramp light
is on), then the CPAP device will reach the
prescription air pressure setting according
to the preset ramp time.
Your physician may have prescribed a
specific ramp time. In this case, do
not attempt to adjust the ramp
setting or operating the unit without
the ramp function turned on without
consulting your physician.
ON/OFF
LIGHT
RAMP
LIGHT