E wheels e wheels – Activeforever eWheels Commute Moped 600 Watt User Manual
Page 4
Advertising
e wheels
e
wheels
TM
Handlebar Installation
2. Connect the Handlebar assembly and Fork/Steer tube together with the bolt and radiused spacer provided
(Figure B). The notch shown in Figure B needs to be vertically aligned.
3. Once bolt is in, turn the bars to the left or right as far as they will go. This will allow you to finger tighten the
locknut on. Still in the turned position tighten bolt with your 12mm socket driver or socket wrench w/ extension
and 17mm wrench.
(B)
Notch
Advertising