Actron Elite AutoScanner® CP9185 - Manual (Page 50)

Using The Scan Tool
3 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
From System Setup menu:
1.Select Memory Test.
•Use UP or DOWN arrow
key until Memory Test is
highlighted.
•Press ENTER .
✓
Dots along the bottom of the
screen show progress of the
Memory Test.
❒ Memory Test may take
several minutes to complete.
❒ Memory Test results display.
❒ If no problems were
detected, then PASS is dis-
played
❒ If RAM fails, an error message is shown.
❒ If ROM fails, a checksum is shown.
2. Return to System Setup menu.
•Press ENTER .
Contrast Adjust
Beeper
Auto Power Off

Tool Information
Display Test
Keyboard Test
Memory Test
System Setup
Memory Test 
RAM Pass
ROM FAIL 1234
............
Memory Test