In-1 sensor installation guidelines, Basic setup is complete, Using the weather center weather forecast – AcuRite 00608 Weather Station User Manual

Page 6: Learning mode, Barometric pressure, High & low records, Wind speed

Advertising
background image

11

10

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the

ground (higher is better for wind measurement) in an open area. Secure to

fence post, 2ʼx4ʼ wood, 3/4” pole, etc. (not included)
LEVEL INSTALLATION Use a bubble level (not included) to ensure level

installation for accurate wind measurement.

Top or Side Mount

1. Insert the mounting base into the

hole on the bottom of the sensor.

2. Use one of the screws included in

the hardware bag to fasten the

lower sensor housing to the

mounting base.

3. Make sure the sensor is level using

a bubble level.

4. Fasten mounting base to a post or

railing using 2 screws.

Pole Mount

1. Insert 3/4” schedule 40 PVC (25.8 mm

O.D.) pole (not included) or similar item

all the way into the hole on the bottom of

the sensor. Note: Mounting base not used.

2. Use one of the screws included in the

hardware bag to fasten the lower sensor

housing securely to the pole.

3. Make sure the sensor is level using a

bubble level.

The 3-in-1 sensor is now ready to use.

Basic Setup is Complete

The 3-in-1 sensor will now synchronize with the display unit. It may take a few

minutes for synchronization to complete. If both or one of the units appear to

be functioning improperly, please refer to the troubleshooting section.

OPERATION

Using the Weather Center
Weather Forecast

AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast

of weather conditions for the next 12 to 24 hours by collecting data from the

sensor in your backyard. It generates a forecast with pinpoint accuracy -

personalized for your exact location.

Learning Mode

Self-Calibrating Forecasting use a unique algorithm to analyze changes in

pressure and temperature over a time period (called Learning Mode) to

determine your altitude. After 14 days, the Learning Mode icon disappears

from the display screen. At this point, the self-calibrated pressure is tuned in to

your location and the unit is ready for superior weather prediction.

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This

weather center displays the current pressure with an arrow icon to indicate the

direction the pressure is trending (FALLING, STEADY, or RISING).

High & Low Records

The Record Highs & Lows button ( ) displays minimum and maximum

recordings for outdoor and indoor temperature and humidity. To select

between viewing daily (since midnight) or all-time records, slide the switch

located on the back of the display. To reset low records, press and hold the

( ) button while viewing low records. To reset high records, press and hold

the ( ) button while viewing high

records.

Wind Speed

The Wind area of the display features

WIND SPEED PEAK, AVERAGE,

CURRENT WIND SPEED, and a graphic

representation of current wind speed.

There is also a time stamp for the last

wind speed reading.

Top Mount

Side Mount

Pole Mount

Do not install during

electrical storms. Do

not place pole or

sensor near

electrical lines or

electrical equipment.

View the complete list of icons at www.AcuRite.com/acurite-icons

EXAMPLE

OF WEATHER

FORECAST

DISPLAY

ICONS

RAIN

LIKELY

RAIN/SNOW

MIX LIKELY

SNOW

LIKELY

LIGHT SNOW

LIKELY

MOSTLY

CLOUDY

CLOUDY

LIGHT RAIN

LIKELY

PARTLY

CLOUDY

CLEARING

(flashing=stormy)

(flashing=stormy)

Advertising