AcuRite 00838 Weather Station - Manual (Page 5)

5
Clock Setup
Press and hold the “SET” button, located on the back of the display unit, for
3 seconds to enter SET MODE. Once in set mode, the preference you are cur-
rently setting will blink on the display.
To adjust the currently selected (flashing) preference item, press the “p” or
“q“ buttons, located on the back of the display unit (press and HOLD to fast
adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference.
The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
You will automatically exit SET MODE if no buttons are pressed for 30
seconds. Enter basic setup mode at any time by pressing and holding the “SET”
button for 3 seconds.