AcuRite 01098 Weather Station - Manual (Page 2)

Introduction
Thank You for purchasing this AcuRite ® product. Please read through
this manual in itʼs entirety to fully enjoy the benefits and features of this
product. Please keep this manual for future reference.
Overview
SETUP
SETUP
Battery Choice & Temperature Range
Extended periods of cold temperatures ( below -4ºF / -20ºC ) can cause
alkaline batteries to function improperly. This will cause the outdoor
wireless sensor to stop transmitting temperature readings. Use lithium
batteries in these low temperature conditions to ensure continued
operation for wireless sensors placed outdoors. NOTE: Rechargeable
batteries are not recommended due to higher operating voltages.
Installing Batteries - Wireless Sensor
Installing Batteries - Display Unit
Remove the battery compartment
cover.
Install 2 fresh “AA” batteries as shown
here.
Replace the battery compartment
cover. BATTERIES MUST BE INSTALLED
FOR THE SENSOR TO OPERATE
Remove the battery
compartment cover.
Install 3 fresh “AA” batteries
into the battery compartment.
Replace the battery
compartment cover.
2 1
Outdoor
Temperature
Momentary Backlight Button
(on top)
Intelli-Time ®
Clock
Indoor
Temperature
Month / Day
Indoor
Humidity
Barometric
Pressure
& Graph
Weather
Forecast
Outdoor
Humidity
A/B/C Wireless Selection
To allow for more than one weather station and wireless sensor
network to be used in close proximity, the display unit and the
wireless sensor have a small switch labeled “A B C” within the
battery compartments. This switch selects one of 3 wireless modes
to use, and both switches MUST be set in matching positions (either
A, B, or C) for wireless communication to take place successfully.
RESET