Acumen AiM 108CH - Manual (Page 6)

- 6 -
General Notations
The terms of IP-based devices or products used in this document refer to H.264 HD/JPEG IP
Fast Domes, Video Servers, or IP Cameras. The terms of DVR/NVR devices/products refer to
DVR 3, DVR5 series, and NVR Touch Series.
Before Using AIM Software HD 2.6
AIM Software HD 2.6 contains video recording. AIM Software HD 2.6 supports
multiple hard disk drives recording. If overwritten setting is enabled, the oldest
recorded video clips get deleted first. If you want logical partitions in your hard disk
drive, please setup at least 20 GB for each drive. To setup hard disk setting, please
click on
“System Setting” button.
Select recording hard drives for AIM Software HD 2.6 recording. To enable HDD overwritten
option, please check this option.
Furthermore, each logical HDD drive should contain at least 10% empty space for storing video
data. AIM Software HD 2.6 deletes the oldest files first until it reaches 90% of the logical drive,
and it proceeds to the next logical hard disk drive for recording.
On-line User Manual
AIM Software HD 2.6 adopts Acrobat Reader for its on-
line manual by clicking on “Windows->
ACUMEN AIM HD 2.6- >User Manual”. You must install Acrobat Reader before opening the
on-line manual.
Uninstall AIM HD 2.6
To uninstall AIM HD 2.6, please select Start->Program Files-> ACUMEN AIM HD 2.6->Uninstall.
A user might want to export the database. Re-import the database after new installation.
Please see Database Manager for detail.
Using AIM Software HD 2.6 on Windows Vista and Windows 7 platforms
When you install AIM Software HD 2.6 on Windows Vista and Windows 7 platforms, please go to
control panel->User Account Control Setting and low the setting to Default. This can make sure
that AIM can login automatically when AIM watchdog performs system reboot.