Acura Embedded PowerBrick ATOM - Manual (Page 12)

Boot option #1
This field is used to adjust the boot sequence of the system. Boot Option #1 is the first
boot device that the system will boot from, next will be #2 and so forth.
Security
Administrator Password
Sets the administrator’s password
User Password
Sets the user’s password.
Save & Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes. You can also press <F4> to save and
exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then press <Enter>.
You may be prompted to confirm again before exiting. You can also press <ESC> to exit
without saving the changes.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog box will
appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then press <Enter>.
You may be prompted to confirm again before exiting.
Save Changes
To save changes and continue configuring the BIOS, select this field then press <Enter>.
A dialog box will appear. Confirm by selecting Yes.
Discard Changes
To discard the changes, select this field then press <Enter>. A dialog box will appear.
21 22