4 windows xp embedded, 5 linux embedded, 6 application software – Acura Embedded PowerBrick 3.0 User Manual

Page 6: Specifications for power brick

Advertising
background image

PowerBrick Quick Reference Manual

3.4 Windows

XP

Embedded

If you want to reinstall Windows XP Embedded, boot the computer, place

the CD-ROM labeled “Windows XP Embedded Recovery” into the external

CD-ROM drive, presses RESET and follow the instructions on the screen.

We recommend that this be done by experienced computer users only.

3.5 Linux

Embedded

If you want to install Linux, boot the computer, place the CD-ROM labeled
“Acura Embedded Linux” into the external CD-ROM drive, press RESET
and follow the instructions on the screen. Note: this should only be done by
an advanced user who has experience with Linux.

3.6 Application

Software

You should be able to run all normal/generic application software such as
Microsoft Word, Excel, PowerPoint, Adobe software etc. if you have
Windows installed. See the relevant manual/help guides for the specific
software. For Linux you will have to specifically select software designed
for Linux. Acura is not responsible for failure of any software on your
computer but if you have any particular software needs, please call Acura
Technical Support or email

[email protected]

.

3.7. Specifications for Power Brick

Table 3.2: Input/Output

15 Pin VGA

1

PS/2 Keyboard & Mouse

1

RS232 Serial Port

4

USB 2.0

4

RJ45 Gigabit Ethernet Port

2

Compact Flash II

1

Audio Jacks

1

Ignition controller (optional)

1

GPS/WiFi/CDMA antenna (optional)

1

8 ~ 30V DC Power Jack

1




Page 7

Table 3.3: System Features

Processor

Intel® Core™ Duo processor (1.8 GHz)

System FSB

667 MHz

Memory

533MHz/667MHz DDR2 SO-DIMM up to 1GB

Video

Integrated Intel® Extreme 945GM Graphic, support
64MB DVMT

Audio

Audio Jacks

Hard Disk

Standard 2.5” SATA hard disk, 80GB

CD-ROM None
LAN

Two Broadcom PCIe GbE controllers

USB 2.0

Integrated 4 independent OHCI controller supporting
USB 1.1 ports; Integrated 1 EHCI controller
supporting USB 2.0 ports; Dynamic connection
support to USB 2.0 or USB 1.1 devices

Hardware Monitor

System temperature, voltage and fan speed monitor.
Auto Thermal fan speed control

Power
Management

ACPI 1.0b compliance and OS direct power
management, Wake-on event: RTC/USB
Keyboard/Modem/LAN/Keyboard/Mouse

Dimensions

7.60“X 5“ x4.13“ (W x L x H)

Power

8 ~ 30V DC



3.8 Operation and maintenance

This module requires no routine maintenance. The green LED indicator
when lit indicates proper operation and health.

The power supply must be protected by a 15A auto fuse on the input line
from the vehicle battery.

Page 8

Advertising