Acura Embedded AcuTab-W - Manual (Page 36)

AcuTab 2 Manual
1. Place the AcuTab 2 to rear side and install the rubber
bumpers to the 4 corners of the system.
2. Screws the rubber bumpers to fix them securely into the system.
2.2.2. Removing the Rubber Bumpers
To remove the rubber bumpers, please place the system to rear side
and unscrew the rubber bumpers of the tablet PC.
2.2.3. Plugging to the DC supply
The AC adapter provides external power source to your system and
charges the internal battery pack at the same time. The AC adapter
also has an auto-switching design that can connect to any 100VAC ~
240VAC power outlets.
To connect the power adapter:
1. Plug the AC adapter connector to the DC-Jack socket on the left
side of the system.
2. Plug the power cord to the AC adapter.
36