What to do after the engine starts – Acura 2011 TSX Sport Wagon User Manual
Page 287
Advertising

285
H
an
d
lin
g t
h
e U
n
ex
p
ec
te
d
Jump Starting
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle's
battery terminal.
3. Disconnect the jumper cable from your vehicle's battery terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle's
battery terminal.
Have your vehicle inspected by a nearby service station or a dealer.
31TL7600.indb 285
2010/09/10 15:19:57
Advertising
This manual is related to the following products: