Acura 2013 MDX - Manual (Page 579)

2. Remove the towing hook and
wheel nut wrench located behind
the cargo area cover on the
driver's side.
3. Screw the towing hook into the
hole, and tighten it with the wheel
nut wrench.
To avoid damage to your vehicle, use
the towing hook for straight, flat
ground towing only. Do not tow at an
angle. The tow hook should not be used
to tow the vehicle onto a flat bed. Do
not use it as a tie down.
TOWING HOOK and
WHEEL NUT WRENCH
WHEEL NUT WRENCH
TOWING HOOK Front
If Your Vehicle Gets Stuck
574
12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu
2013 MDX
Taking
Care
of
the
Unexpected