Acura 2008 TSX - Manual (Page 107)

While the multi-information display
shows ‘‘POSITION SETUP,’’ press
the SEL/RESET button on the
steering wheel. The display changes
to ‘‘MEMORY POSITION LINK’’ as
shown above. Press the SEL/RESET button. The
display changes as shown above.
Select ‘‘ON’’ or ‘‘OFF ’’ by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.
If ‘‘MEMORY POSITION LINK’’ is
‘‘ON,’’ the driver’s seat moves to the
position stored in the memory when
you open the driver’s door, using the
remote transmitter.
Refer to page for setting the seat
position memory. Also refer to page
for remote transmitter use. 132
143
Position Setup Memory Position Link
Multi-Information Display
104 2008 TSX
Table Of Contents Main Menu