Acura 2013 TSX - Manual (Page 287)

286
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle’s engine has started, remove the jumper cables in the
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle’s
battery - terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle’s
battery + terminal.
Have your vehicle inspected by a nearby service station or a dealer.
6-cylinder models
■ What to Do After the Engine Starts
13 ACURA TSX 4D-31TL16400.book 286 ページ ２０１２年７月２７日 金曜日 午前１１時３１分
QRG
Index
TOC
2013 TSX
following order.