Acura 2012 RDX - Manual (Page 54)

7. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
8. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Using the Center LATCH
To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.
Remove the head restraint (see page
136). Make sure the removed head
restraint is secured in the cargo area.
Reinstall the head restraint when the
child seat is removed.
Follow step 1 through 8 as described
previously to secure the child seat.
When you install the child seat in the
rear center seating position, you
cannot use the seat belt behind the
driver's seat.
TETHER STRAP HOOK ANCHOR
CENTER LOWER ANCHORS
Installing a Child Seat
48
11/06/16 17:42:51 12 ACURA RDX MMC North America Owner's M 50 31STK650 enu