Acura 2012 TSX - Manual (Page 288)

286
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle’s battery
- terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle’s battery
+ terminal.
Have your vehicle inspected by a nearby service station or a dealer.
6-cylinder models
■ What to Do After the Engine Starts
TSX 4D-31TL1630.book 286 ページ ２０１１年６月２９日 水曜日 午後４時４６分