Acura 2008 TL - Manual (Page 306)

Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
Test the lights to make sure the
new bulb is working.
Reinstall the trunk lid lining. Make
sure it is installed under the edge
of the trunk seal.
Install all removed parts.
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up around the openings of
the seat belt anchors can cause the
belts to retract slowly. Wipe the
openings with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol. 4.
5.
6.
7.
Cleaning the Seat Belts
Lights, Cleaning the Seat Belts
Ma
int
e
na
nce
303
OPENING
2008 TL
Table Of Contents Main Menu