Playing fm/am radio 136, P136), Playing fm/am radio – Acura 2013 ZDX Navigation User Manual
Page 138: Selecting fm/am mode audio screen control, Selecting fm/am mode, Audio screen control
136
Au
d
io
Playing FM/AM Radio
Selecting FM/AM Mode
1. Press the AM/FM button.
Press the AM/FM button again, if necessary, to select the frequency band (AM,
FM1, FM2).
2. Select a station using the Preset buttons and the bars (SKIP, TUNE, SCAN/TITLE)
On the FM bands, you can also use the CATEGORY bar and SCAN/TITLE bar
(TITLE side) to select a station provided by the Radio Data System (RDS).
The band and frequency are displayed on the display.
Audio Screen Control
H AUDIO button (in FM/AM mode)
Control the audio system through the navigation screen.
1. Move
e to select a frequency band
(AM, FM1, or FM2).
2. Rotate
i to select a preset
station. Press
u.
Press and hold
u until a beep
sounds to store the current
station in a preset button.
Move
r to select AUDIO
MENU.
1
Playing FM/AM Radio
d “Display audio screen”
You can control the radio using voice control
commands.
2 Radio Commands P. 237
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
Stereo indicator
Frequency band
Preset stations