Getting ready to replace the flat tire – Acura 2011 TSX User Manual
Page 280
Advertising

If a Tire Goes Flat Changing a Flat Tire
278
H
an
d
lin
g t
h
e U
n
ex
p
ec
te
d
2. Take the tool case out of the trunk. Take
the jack and wheel nut wrench out of the
tool case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
1. Pull the handle on the trunk floor lid and
open the lid. Hook the handle to the edge
of the trunk opening.
Getting Ready to Replace the Flat Tire
4. Place a wheel block or rock in front and
rear of the wheel diagonal to the flat tire.
The tire to be replaced.
Wheel
Blocks
Tool Case
Spare Tire
31TL1620.indb 278
2010/09/10 16:13:52
Advertising
This manual is related to the following products: