Acura 2010 TL - Manual (Page 526)

Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver. Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back. 3. 2.
1.
CONTINUED
Replacing the Front Side Marker
Light Bulb
Lights
Ma
int
e
na
nce
523
HOLDING CLIP
HOLDING
CLIP
SPOILER
BOLTS
09/07/29 18:30:56 31TK4610_528
2010 TL