Collision mitigation braking system ™ (cmbs™), 2011 mdx – Acura 2011 MDX User Manual

Page 467

Advertising
background image

●

When the VSA system indicator
comes on (see page

467

).

●

When you turn the ignition switch
to the ON (II) position, the CMBS
indicator should come on for a few
seconds, then go off. If the
indicator comes on at any other
time and a CHECK CMBS
SYSTEM message appears on the
multi-information display, there is
a problem with the CMBS. You
can still drive your vehicle, but
CMBS will not be operating. Have
your vehicle checked by a dealer.

Limitations
The CMBS may not activate under
some conditions. Here are a few
examples:

●

The distance between your vehicle
and the vehicle ahead of you is too
short.

●

A vehicle cuts in front of you at a
slow speed, or it brakes suddenly.

●

When you accelerate rapidly and
approach the vehicle ahead of you
at high speed.

●

Immediately after you begin
driving.

YOUR VEHICLE

CONTINUED

Collision Mitigation Braking System

™ (CMBS™)

463

Driving

10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

2011 MDX

Advertising
This manual is related to the following products: