Acura 2014 ILX - Manual (Page 279)

278
uu Replacing Light Bulbs u Front Turn Signal Light Bulbs
Main
tenan
ce
Front Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel to
the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips (A), (D) and screw,
pull the inner fender back.
2 Engine Compartment Cover P. 259
3. Turn the socket to the left and remove it,
then remove the old bulb.
4. Insert a new bulb.
Front Turn Signal Light: 21 W
1 Front Turn Signal Light Bulbs
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Holding clip (D-type)
Clip
Push until the
pin is flat.
Screw
Inner
Fender
Clip (D)
Clips (A)
Bulb Socket
14 ACURA ILX-31TX66100.book 278 ページ ２０１３年３月７日 木曜日 午前１１時３３分
QRG
Index
TOC
2014 ILX