System initialization – Acura 2012 TL Navigation User Manual

Page 130

Advertising
background image

System Initialization

Navigation System

129

GPS Initialization

Depending on the length of time the
battery was disconnected, your system
may require GPS initialization. If it
does, the following screen appears:

If this procedure is not necessary,
the system proceeds directly to the

Disclaimer

screen (see page 18 ).

During initialization, the system
searches for all available GPS satellites
and obtains their orbital information.
During this procedure, the vehicle
should be out in the open with a clear
view of the sky.

If the navigation system fi nds the
satellites properly, this box clears and
the

Disclaimer

screen is shown. If

within 10 minutes the system fails to
locate a suffi cient number of satellites
to locate your position, the following
screen appears:

If the system is still unable to acquire
a signal, follow the instructions on the
screen, or contact your local dealer for
assistance.

NOTE:
The average acquiring time is less than
10 minutes.

Map Matching

This part of the initialization matches
the GPS coordinates found above with a
road on the map screen. To perform this
part of the procedure, ensure that the
navigation system is displaying a map,
and drive the vehicle on a mapped road
(a road shown on the

map

screen). Do

not enter a destination at this time.
When the name of the current road you
are driving on appears at the bottom
of the screen, the entire procedure is
complete. Your system is now ready to
use.

Advertising
This manual is related to the following products: