Acura 2013 TL Navigation - Manual (Page 78)

Driving to Your Destination
78 Navigation System
Adding Waypoint
From the
DEST screen ( Route ),
if you say or select Waypoint , the
Add Waypoint screen is displayed.
Select either SEARCH AROUND
or SEARCH ALONG by rotating
Interface Dial knob .
Next, select the category from the
“Originals” or “My Favorites” tab on
the
Category screen, then follow the
menu prompts to select a destination.
When the system performs a search
from
SEARCH ALONG , it displays
matches that lie within a corridor on
either side and in front of your route.
From SEARCH AROUND , the system
displays matches that are a uniform
distance from the departure point/
waypoint/destination.
The search “corridor” distance value
can be changed in
Edit Waypoint
Search Area in SET UP (see page 112 ).
If you add a waypoint, the Dest List
screen will be displayed. If you move
the
Interface Dial down and select
OK , the addition is completed and
rerouting begins. Press the MAP/
GUIDE button to return to the map
screen without adding the waypoint.
To add another waypoint, press the
DEST/ROUTE button and repeat
the procedure.
If Waypoint is grayed out, the
maximum of fi ve places (including the
destination) has been entered.
NOTE:
The system does not allow you to select
the roads you want to use to get to a
destination. However, after you enter a
destination, you can select intersections
or POI waypoints that the system will
use to tailor your route.
Destination Lists
If you select Destination Lists from
the DEST screen ( Route ), you can
store four waypoints and one destination
simultaneously. If you cancel the route,
everything will be deleted.
2013 TL