AIPTEK PocketCinema V60 - Manual (Page 17)

User’s Manual

Page 17
EN
4. Auto Power Off
This item allows users to enable or disable the auto power off function of the
projector. If auto power off is turned ON, the projector will be automatically turned
off after the chosen period is due.
5. Memory Source
This function allows users to select the storage devices between internal
memory, Micro SD Card, and USB devices.
: Internal memory
: Micro SD/SDHC
: USB Dongle
6. Mobile Charging Mode
The projector’s battery can charge your mobile phone in urgent case.
Activate the Mobile Charging Mode for saving power by turning off the projecting
screen while charging your cellphone.
Note: USB port output ȹ 5V, 500mA炷max.炸
7. System
- Factory Setting
Reset the projector to factory default setting.
- Firmware Update
Firmware update information is available on our website. Pleae follow up the
instruction on the website for the update.
- Information
Detail information about the projector.
Notice for Long-time Projection
The built-in battery supports approximately 100 mins of projection. For long time
projection, you are recommened to use AC adapter.
When the battery is too weak to stay in operation, the low battery capacity icon ( )
will flash. You need to charge the product while the icon showed.
It’s normal that the projector will feel warm with continuous use due to its high
performance. If the projector runs for a long time and over-heated, the
High-Temperature icon (
) will appear on the screen. The system will automatically
enter the standby mode.