SUUNTO X10 - Manual (Page 49)

48
Cross Track Error (xte): This is the shortest distance from
your current location to the straight line connecting the
waypoints of the route.
Speed (spd): Displays the speed in the unit of your choice.
Heading (hea): Displays the heading in degrees.
3.5.8. Track Back (Active track)
The Track Back function starts the navigation along the currently active track log to the
starting location.
To activate the Track Back function:
1.In the Set menu, select Track Back with UP/DOWN and
press ENTER. The message ‘
START TRACK BACK ?’ is
displayed.
2.Press ENTER to confirm the selection. Suunto X10 takes
you to the Navigation mode’s main display and activates the
navigation to the starting location. The Track Back functions
just like the navigation, with the exception that you cannot
view additional data displays. The destination is displayed on
the top row.
3.To stop the Track Back navigation, choose as the
navigation option, as the activity option or turn off the GPS
in the Function Menu.
NOTE: Starting the Track back function activates a new track log file.
NOTE: To view the total distance to the starting location, select dtf as a shortcut (see
section 3.6.6.).