ASRock B75 Pro3 - Manual (Page 32)

32
ASRock B75 Pro3 Motherboard
English
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1) speaker to this header.
(see p.2, No. 16)
Chassis and Power Fan Connectors Please connect the fan cables
(4-pin CHA_FAN1)
to the fan connectors and match
(see p.2, No. 37) the black wire to the ground pin.
CHA_FAN1 and CHA_FAN2
supports Fan Control.
(3-pin CHA_FAN2)
(see p.2, No. 10)
(3-pin PWR_FAN1)
(see p.2, No. 36)
CPU Fan Connectors Please connect the CPU fan
(4-pin CPU_FAN1) cable to the connector and
(see p.2, No. 1) match the black wire to the
ground pin.
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
3-Pin Fan Installation
Pin 1-3 Connected
Power LED Header Please connect the chassis
(3-pin PLED1) power LED to this header to
(see p.2, No. 22) indicate system power status.
The LED is on when the system
is operating. The LED keeps
blinking in S1/S3 state. The
LED is off in S4 state or S5
state (power off).