ASRock 990FX Extreme3 - Manual (Page 18)

18
ASRock 990FX Extreme3 Motherboard
English
Step3. Align and insert ASRock SLI_Bridge_2S Card to the goldfingers on each
graphics card. Make sure ASRock SLI_Bridge_2S Card is firmly in place.
ASRock SLI_Bridge_2S Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE2 slot.
2.5.2 Driver Installation and Setup
Install the graphics card drivers to your system. After that, you can enable the Multi-
Graphics Processing Unit (GPU) feature in the NVIDIA
® nView system tray utility.
Please follow the below procedures to enable the multi-GPU feature.
For Windows ® XP / XP 64-bit OS:
(For SLI TM mode only)
A. Double-click NVIDIA Settings icon on your Windows ® taskbar.
C. Reboot your system.
D. You can freely enjoy the benefits of SLI TM features.
B. From the pop-up menu, select Set SLI and PhysX configuration. In
Set PhysX GPU acceleration item, please select Enabled. In Select
an SLI configuration item, please select Enable SLI. And click Apply.